Developing Custom Modules

Custom modules in the iii Engine allow developers to extend the core functionality of the system. A module acts as a container for logic that can register functions, triggers, and integrate with external systems.

Introduction

Modules are dynamically loaded and configured, often utilizing an Adapter pattern to allow for swappable backend implementations (e.g., swapping an in-memory event bus for a Redis-backed one).

The engine provides a trait-based system where modules implement the CoreModule trait for lifecycle management and the ConfigurableModule trait for handling configuration and adapter injection.

Module Architecture

The module system is built around two primary traits: CoreModule and ConfigurableModule.

Core Traits

Trait	Description	Key Methods
CoreModule	The base trait for all modules. Handles lifecycle, identification, and function registration.	`name()`, `create()`, `initialize()`, `register_functions()`
ConfigurableModule	Extends `CoreModule` to support typed configuration and pluggable adapters.	`build()`, `registry()`, `adapter_class_from_config()`

Lifecycle Flow

The following diagram illustrates the lifecycle of a module from creation to initialization.

Implementing a Configurable Module

Developing a custom module typically involves defining an adapter interface, implementing specific adapters, and then wrapping them in a module structure.

Step 1: Define the Adapter Trait

Define an async_trait that specifies the behavior your module's backend must implement. This allows users to switch implementations via configuration.

use async_trait::async_trait;
use serde_json::Value;

#[async_trait]
pub trait CustomEventAdapter: Send + Sync + 'static {
    async fn emit(&self, topic: &str, event_data: Value);
    async fn subscribe(&self, topic: &str, id: &str, function_path: &str);
    async fn unsubscribe(&self, topic: &str, id: &str);
}

Why async_trait? Rust's async traits require this macro to handle the complexity of async function pointers.

Step 2: Implement Adapter Registration

To make adapters discoverable by the configuration system, you must define a registration struct and use the inventory crate.

use std::sync::Arc;
use std::future::Future;
use std::pin::Pin;
use iii::Engine;

pub type CustomEventAdapterFuture = Pin<
    Box<dyn Future<Output = anyhow::Result<Arc<dyn CustomEventAdapter>>> + Send>
>;

pub struct CustomEventAdapterRegistration {
    pub class: &'static str,
    pub factory: fn(Arc<Engine>, Option<Value>) -> CustomEventAdapterFuture,
}

// Implement AdapterRegistrationEntry trait
impl AdapterRegistrationEntry<dyn CustomEventAdapter> for CustomEventAdapterRegistration {
    fn class(&self) -> &'static str {
        self.class
    }

    fn factory(&self) -> fn(Arc<Engine>, Option<Value>) -> CustomEventAdapterFuture {
        self.factory
    }
}

// Register the type with inventory
inventory::collect!(CustomEventAdapterRegistration);

Purpose: This registration system allows the engine to discover and instantiate adapters dynamically based on configuration.

Step 3: Create Adapter Factories

Define factory functions that instantiate your specific adapter implementations (e.g., InMemory or Logging).

use iii::register_adapter;

fn make_inmemory_adapter(
    engine: Arc<Engine>,
    config: Option<Value>
) -> CustomEventAdapterFuture {
    Box::pin(async move {
        Ok(Arc::new(InMemoryEventAdapter::new(config, engine).await?)
            as Arc<dyn CustomEventAdapter>)
    })
}

// Register the specific adapter implementation
register_adapter!(
    <CustomEventAdapterRegistration>
    "my::InMemoryEventAdapter",
    make_inmemory_adapter
);

Step 4: Implement Adapter Logic

Create the actual adapter implementations.

Step 5: Implement the Module Logic

The module struct holds the Engine reference and the injected Adapter.

use serde::Deserialize;
use once_cell::sync::Lazy;
use tokio::sync::RwLock;

#[derive(Debug, Clone, Deserialize, Default)]
#[serde(deny_unknown_fields)]
pub struct CustomEventModuleConfig {
    #[serde(default)]
    pub adapter: Option<AdapterEntry>,
}

#[derive(Clone)]
pub struct CustomEventModule {
    adapter: Arc<dyn CustomEventAdapter>,
    engine: Arc<Engine>,
    _config: CustomEventModuleConfig,
}

#[async_trait]
impl ConfigurableModule for CustomEventModule {
    type Config = CustomEventModuleConfig;
    type Adapter = dyn CustomEventAdapter;
    type AdapterRegistration = CustomEventAdapterRegistration;
    const DEFAULT_ADAPTER_CLASS: &'static str = "my::InMemoryEventAdapter";

    // Define how to access the registry
    async fn registry() -> &'static RwLock<HashMap<String, AdapterFactory<Self::Adapter>>> {
        static REGISTRY: Lazy<RwLock<HashMap<String, AdapterFactory<dyn CustomEventAdapter>>>> =
            Lazy::new(|| RwLock::new(CustomEventModule::build_registry()));
        &REGISTRY
    }

    // Builder method
    fn build(
        engine: Arc<Engine>,
        config: Self::Config,
        adapter: Arc<Self::Adapter>
    ) -> Self {
        Self {
            engine,
            _config: config,
            adapter
        }
    }
}

Registering Functions

Modules expose functionality to the engine (and thus to workers) by registering functions. This is typically done in the initialize method or register_functions.

Registration Request Structure

When registering a function, you must provide a RegisterFunctionRequest.

Field	Type	Description
`function_path`	`String`	Unique dot-notation path (e.g., "custom_emit")
`description`	`Option<String>`	Human-readable description of the function
`request_format`	`Option<Value>`	JSON Schema defining the expected input
`response_format`	`Option<Value>`	JSON Schema defining the expected output

Example Registration

use iii::RegisterFunctionRequest;

#[async_trait]
impl CoreModule for CustomEventModule {
    fn name(&self) -> &str {
        "custom_event"
    }

    async fn initialize(&self) -> anyhow::Result<()> {
        self.engine.register_function(
            RegisterFunctionRequest {
                function_path: "custom_emit".to_string(),
                description: Some("Emit a custom event".to_string()),
                request_format: Some(serde_json::json!({
                    "type": "object",
                    "properties": {
                        "topic": { "type": "string" },
                        "data": { "type": "object" }
                    },
                    "required": ["topic", "data"]
                })),
                response_format: None,
                metadata: None,
            },
            Box::new(self.clone()), // The handler
        );
        Ok(())
    }

    async fn register_functions(&self, _engine: Arc<Engine>) -> anyhow::Result<()> {
        // Additional function registrations can go here
        Ok(())
    }
}

Handling Function Invocations

To handle invocations, the module (or a specific handler struct) must implement the FunctionHandler trait.

use iii::{FunctionHandler, FunctionResult};

#[async_trait]
impl FunctionHandler for CustomEventModule {
    async fn handle(&self, input: Value) -> FunctionResult {
        // 1. Parse Input
        let topic = input.get("topic")
            .and_then(|v| v.as_str())
            .ok_or_else(|| anyhow::anyhow!("Missing 'topic' field"))?;

        let data = input.get("data")
            .cloned()
            .unwrap_or(Value::Null);

        // 2. Execute Logic (using the adapter)
        self.adapter.emit(topic, data).await;

        // 3. Return Result
        FunctionResult::Success(None)
    }
}

Registering Triggers

Modules can also act as sources of events by registering TriggerTypes. This allows the engine to route external events (like Cron ticks or HTTP requests) to specific functions.

Trigger Architecture

Implementation

To support triggers, a module implements TriggerRegistrator.

use iii::{TriggerRegistrator, Trigger, TriggerType};
use std::future::Future;
use std::pin::Pin;

impl TriggerRegistrator for CustomEventModule {
    fn register_trigger(
        &self,
        trigger: Trigger,
    ) -> Pin<Box<dyn Future<Output = Result<(), anyhow::Error>> + Send + '_>> {
        Box::pin(async move {
            // Extract configuration
            let config = trigger.config;
            let subscribes = config.get("subscribes")
                .and_then(|v| v.as_array())
                .ok_or_else(|| anyhow::anyhow!("Missing 'subscribes' array"))?;

            // Subscribe to each topic
            for topic in subscribes {
                let topic_str = topic.as_str()
                    .ok_or_else(|| anyhow::anyhow!("Invalid topic"))?;

                self.adapter.subscribe(
                    topic_str,
                    &trigger.id,
                    &trigger.function_path
                ).await;
            }

            Ok(())
        })
    }
}

Then, register the trigger type during initialization:

async fn initialize(&self) -> anyhow::Result<()> {
    // Register functions
    // ... (function registration code)

    // Register trigger type
    let trigger_type = TriggerType {
        id: "event".to_string(),
        registrator: Box::new(self.clone()),
        description: Some("Event-based trigger".to_string()),
    };

    self.engine.register_trigger_type(trigger_type).await?;

    Ok(())
}

Configuration

Modules are configured via config.yaml or JSON passed during initialization. The ConfigurableModule trait maps this configuration to a Rust struct.

Configuration Struct

#[derive(Debug, Clone, Deserialize, Default)]
#[serde(deny_unknown_fields)]
pub struct CustomEventModuleConfig {
    #[serde(default)]
    pub adapter: Option<AdapterEntry>,
}

Usage in Config File

modules:
  - class: my::CustomEventModule
    config:
      adapter:
        class: my::LoggingEventAdapter
        config:
          inner_adapter: my::InMemoryEventAdapter

Nested Adapters: The logging adapter wraps the in-memory adapter, creating a decorator pattern for cross-cutting concerns.

Complete Example

Here's a complete custom module implementation:

examples/custom_event_module.rs

use async_trait::async_trait;
use serde::Deserialize;
use serde_json::Value;
use std::collections::HashMap;
use std::sync::Arc;
use tokio::sync::RwLock;
use iii::{
    Engine, CoreModule, ConfigurableModule, FunctionHandler,
    FunctionResult, RegisterFunctionRequest, TriggerRegistrator,
    Trigger, TriggerType, AdapterEntry
};

// 1. Define Adapter Trait
#[async_trait]
pub trait CustomEventAdapter: Send + Sync + 'static {
    async fn emit(&self, topic: &str, event_data: Value);
    async fn subscribe(&self, topic: &str, id: &str, function_path: &str);
    async fn unsubscribe(&self, topic: &str, id: &str);
}

// 2. Implement In-Memory Adapter
pub struct InMemoryEventAdapter {
    subscriptions: Arc<RwLock<HashMap<String, Vec<String>>>>,
    engine: Arc<Engine>,
}

impl InMemoryEventAdapter {
    pub async fn new(_config: Option<Value>, engine: Arc<Engine>) -> anyhow::Result<Self> {
        Ok(Self {
            subscriptions: Arc::new(RwLock::new(HashMap::new())),
            engine,
        })
    }
}

#[async_trait]
impl CustomEventAdapter for InMemoryEventAdapter {
    async fn emit(&self, topic: &str, event_data: Value) {
        let subs = self.subscriptions.read().await;
        if let Some(function_paths) = subs.get(topic) {
            for function_path in function_paths {
                self.engine.invoke_function(function_path, event_data.clone()).await;
            }
        }
    }

    async fn subscribe(&self, topic: &str, _id: &str, function_path: &str) {
        let mut subs = self.subscriptions.write().await;
        subs.entry(topic.to_string())
            .or_insert_with(Vec::new)
            .push(function_path.to_string());
    }

    async fn unsubscribe(&self, topic: &str, id: &str) {
        let mut subs = self.subscriptions.write().await;
        if let Some(paths) = subs.get_mut(topic) {
            paths.retain(|p| p != id);
        }
    }
}

// 3. Define Module Configuration
#[derive(Debug, Clone, Deserialize, Default)]
#[serde(deny_unknown_fields)]
pub struct CustomEventModuleConfig {
    #[serde(default)]
    pub adapter: Option<AdapterEntry>,
}

// 4. Implement Module
#[derive(Clone)]
pub struct CustomEventModule {
    adapter: Arc<dyn CustomEventAdapter>,
    engine: Arc<Engine>,
    _config: CustomEventModuleConfig,
}

#[async_trait]
impl CoreModule for CustomEventModule {
    fn name(&self) -> &str {
        "custom_event"
    }

    async fn initialize(&self) -> anyhow::Result<()> {
        // Register emit function
        self.engine.register_function(
            RegisterFunctionRequest {
                function_path: "custom_emit".to_string(),
                description: Some("Emit a custom event".to_string()),
                request_format: Some(serde_json::json!({
                    "type": "object",
                    "properties": {
                        "topic": { "type": "string" },
                        "data": { "type": "object" }
                    },
                    "required": ["topic", "data"]
                })),
                response_format: None,
                metadata: None,
            },
            Box::new(self.clone()),
        );

        // Register trigger type
        let trigger_type = TriggerType {
            id: "event".to_string(),
            registrator: Box::new(self.clone()),
            description: Some("Event-based trigger".to_string()),
        };
        self.engine.register_trigger_type(trigger_type).await?;

        Ok(())
    }
}

#[async_trait]
impl FunctionHandler for CustomEventModule {
    async fn handle(&self, input: Value) -> FunctionResult {
        let topic = input.get("topic").and_then(|v| v.as_str()).unwrap_or("");
        let data = input.get("data").cloned().unwrap_or(Value::Null);

        self.adapter.emit(topic, data).await;
        FunctionResult::Success(None)
    }
}

impl TriggerRegistrator for CustomEventModule {
    fn register_trigger(
        &self,
        trigger: Trigger,
    ) -> std::pin::Pin<Box<dyn std::future::Future<Output = Result<(), anyhow::Error>> + Send + '_>> {
        Box::pin(async move {
            let config = trigger.config;
            let subscribes = config.get("subscribes")
                .and_then(|v| v.as_array())
                .ok_or_else(|| anyhow::anyhow!("Missing 'subscribes' array"))?;

            for topic in subscribes {
                let topic_str = topic.as_str()
                    .ok_or_else(|| anyhow::anyhow!("Invalid topic"))?;
                self.adapter.subscribe(topic_str, &trigger.id, &trigger.function_path).await;
            }

            Ok(())
        })
    }
}

config.yaml

modules:
  - class: my::CustomEventModule
    config:
      adapter:
        class: my::InMemoryEventAdapter

Developing Custom Modules

Introduction

Module Architecture

Core Traits

Lifecycle Flow

Implementing a Configurable Module

Step 1: Define the Adapter Trait

Step 2: Implement Adapter Registration

Step 3: Create Adapter Factories

Step 4: Implement Adapter Logic

In-Memory Adapter

Logging Wrapper Adapter

Step 5: Implement the Module Logic

Registering Functions

Registration Request Structure

Example Registration

Handling Function Invocations

Registering Triggers

Trigger Architecture

Implementation

Configuration

Configuration Struct

Usage in Config File

Complete Example

examples/custom_event_module.rs

config.yaml

Best Practices

Use Adapter Pattern

Implement Graceful Shutdown

Provide JSON Schemas

Use Structured Logging

Next Steps

Core Modules

Adapters

On this page